Generally speaking, the horizontal sunshade with an outdoor south elevation of 45 °can easily cover 68% of the solar radiation heat. Installed in the window inside the curtain, soft 100 pages and other sunshade facilities, most of the solar radiation heat absorbed by it is distributed to the indoor air. The sun visor installed on the outside absorbs most of the radiant heat and distributes most of the outdoor air, thus reducing the impact on indoor temperature. Therefore, the use of external sunshade (sunshade) is the best way to save energy in buildings.
Generally speaking, the outer sunshade can keep most of the solar radiation out of the window, while the inner sunshade only partially reflects the solar radiation that has entered the room. Although the effect of external shading is much better than internal shading, internal shading is still widely used, mainly in the form of curtains and blinds. The main forms of external shading are sunshades and sunshades and so on.
Car windshield glass r780a8 glass sunshade Xiangyang car thermal insulation film can be divided into front and rear windshield film and side windshield film Among them, the front windshield has the highest requirement for thermal insulation film. According to the traffic safety regulations of the Ministry of Public Security, the light transmittance of the front windshield must be greater than 70%, on the premise that it does not affect driving safety.
If you build a color steel activity room mainly for the recommendation of growing flowers in winter, it is required that the size of the container activity room should be well measured, appropriate sunshine, plastic windows should be selected for peripheral maintenance, and a color board activity room with a larger skylight is opened on the glass roof. The price of this kind of mobile room is lower, but the indoor temperature is higher in summer and sunshade is needed. If you are because of the small housing area, in order to expand the living space, the privacy of the built mobile house requires high privacy and low economic level, then you can choose thermal insulation board roof, plastic steel window and thermal insulation wall as peripheral maintenance products. Although this kind of products are not strictly resident containers, they are cheap, economical and practical. The disadvantage is poor lighting and general ventilation. If the skylight is added, it will be greatly improved. Choose the right materials and learn how to maintain the container office so that we can live comfortably and comfortably.
Architects attach great importance to the physical environment of academic buildings. The whole building is almost completely wrapped in glass curtain walls, ensuring transparency and interactive experience, while introducing daylight for daily work and research, and the space that does not need daylight is located in the middle of the building, reasonable functional distribution and effective use of natural light reduces the energy consumption caused by artificial light sources. Architects deal with the building shell in an ingenious and innovative way, using double-layer low-iron toughened glass and mechanical sunshades with a total thickness of 41 cm for mechanical ventilation to isolate subway noise and create a quiet learning environment. at the same time, a thermal buffer zone outside the building is formed, which further improves the comfort of the internal environment.
Himalayan four-sided mesh design is ventilated and breathable, the sunshade cloth can be pulled up to resist the sunlight, and the hall strut can be propped up to form a courtyard for shelter from wind and rain at the entrance, covered with picnic mats, the tent can be picked up as high as 210cm, in and out, there is no need to bend down, there is no suppression to greatly improve the comfort of the tent, four-sided gauze + tent cloth design, multiple functions, put away the tent cloth when the sun is shining Let the outdoor party closer to nature, improve the comfort of the account, and can pull up the tent cloth when it rains, effectively shielding from the wind and rain.
When it is also hot, the way to build a sunshade or sunshade net over the whale can be effective in direct sunlight. To achieve the purpose of cooling, apply reflective radiation paint three times. For the original state of Whale Island Paradise, Shanghai Enyu Media does not recommend applying reflective paint directly to the shell of Whale Island. It can be used on the sunshade, and then perpendicular to the light. Play the role of outward refraction. To achieve the purpose of cooling, recruit four convection ventilation. Enyu Media Whale Island maintains the original intention of the design. A three-door design is used to design a pedestrian door on the head of the whale. Emergency doors are designed on both sides, which not only deal with emergencies, but also play the role of ventilation and air convection. Reduce the indoor temperature, recruit five surrounding green plants, one of the functions of green plants is to filter and precipitate impurities in the air, absorb carbon dioxide and exhale oxygen.
Car Meitu car sunshade inside the front curtain sunscreen, windshield, sunscreen umbrella in summer, sun umbrella sunshade sun umbrella curtain thickening portable car thermal insulation sunshade umbrella [general upgrade-large size]
Spray-free plastics are more and more used in home appliances and automobiles because of their excellent appearance, environmental protection and economy. In the field of household appliances, non-spraying materials are used in soymilk machines, drinking fountains, electric cookers, water heaters, washing machines, refrigerators, air conditioners, televisions and so on. In the automotive field, spray-free materials can be used for DVD face frames, central control panels, side skirts, glove boxes, sunshades, instrument panels, etc.
